Book a Demo
Home About Industries Pricing Implementation Latest Book a Demo →
SnapFacility Ecosystem

Your Hospital as a Smart, Connected Building

Smart Facility brings sensors, controllers, cameras, assets and people together in one live command centre — so your hospital runs safer, greener and with fewer surprises.

One command centre Floor-by-floor live view Built on open standards
Smart hospital building connected to the SnapFacility command centreSnapFacilityEnergy today−12% vs last weekLift 3Fault · technician en routeWater tank A68% · normal
Explainer

Smart Facility: from Building to Smart Decisions

Press play — or just watch — to see how Smart Facility work with SnapFacility, step by step.

Smart hospital building cutaway connected to a facility command centreBasement · PowerFloor 1 · OPDFloor 2 · WardsFloor 3 · OT & ICU!!COMMAND CENTRE12 systemsconnecting…HVACPower & DGWaterLiftsFire panelsLive floor map1,860 data pointsF3F2F1B2 alarms · Floor 3Chiller 2Failure risk risingService suggestedDispatchedRavi · ETA 6 minLift 2 → RoofEnergy −12%Uptime 99.2%
Live explainer0:00

How it works · 5 steps

  1. 01Step 1 · Connect

    Every system joins in

    HVAC, power, water, lifts, fire panels, assets and cameras connect through sensors, controllers and integrations.

  2. 02Step 2 · Visualise

    A live map of the hospital

    Floor plans show equipment status, alarms, occupancy and open work in real time.

  3. 03Step 3 · Predict

    AI spots trouble early

    AI looks across systems to predict failures, energy waste and comfort issues.

  4. 04Step 4 · Coordinate

    Teams act as one

    The command centre dispatches FM, BioMed, housekeeping and security with clear SLAs.

  5. 05Step 5 · Improve

    Measure and improve

    Energy, uptime, comfort and compliance are tracked against targets every month.

Tap any step
Overview

What Is a Smart Facility in a Hospital?

A smart facility uses connected devices and software to monitor and manage a building as one system. In a hospital that means HVAC, power, water, medical gas, lifts, fire safety, equipment and housekeeping all reporting into a single view.

SnapFacility combines its IoT sensors, controllers, RFID, AI cameras and integrations with existing BMS and fire systems to create a live command centre — with floor maps, alarms, work orders and analytics in one place.

Live floor maps

See status, alarms and work by floor and room.

Unified systems

HVAC, power, water, lifts and assets together.

Cross-system AI

Predict failures and waste across systems.

Sustainability

Track energy, water and carbon per bed.

Hardware Range

Types of Smart Facility We Supply & Integrate

Every device is selected, installed and connected by SnapFacility and its certified partners.

Command centreLIVE

Command centre

A live control room view with floor maps, alarms, KPIs and work in progress.

  • Video wall or desktop
  • Role-based views
  • Live KPIs
Best for: FM, engineering and hospital leadership
HVAC & air handling

HVAC & air handling

Monitor and schedule AHUs, chillers and cooling towers for comfort and infection control.

  • Temperature & pressure
  • Schedules & setbacks
  • Condition monitoring
Best for: OTs, ICUs, wards and OPDs
Lighting & energy−32% kWh

Lighting & energy

Smart lighting and energy metering cut waste in corridors, offices and car parks.

  • Occupancy control
  • Sub-metering
  • Daylight dimming
Best for: Common areas, offices and parking
Water & plumbing68%

Water & plumbing

Tank levels, pumps, RO plants and leak detection under one view.

  • Level monitoring
  • Pump control
  • Leak alerts
Best for: Tanks, RO plants and utilities
Power & DG0482.6kWh

Power & DG

Electrical panels, DG sets and UPS monitored for load, faults and fuel.

  • Load & power quality
  • DG run logs
  • UPS alarms
Best for: Electrical rooms and critical loads
Fire & life safety

Fire & life safety

Fire panels, smoke detection and evacuation readiness linked to workflows.

  • Fire panel integration
  • Drill records
  • Inspection schedules
Best for: Fire safety and NABH FMS compliance
System Architecture

How It All Connects

From the device on the wall to the action on your team’s phone — secure, real time and fully traceable.

01CaptureDevices on site
HVAC & plant
Power, DG & UPS
Fire & life safety
Assets, RFID & cameras
02ConnectSecure networks
Wi-Fi & Ethernet
LoRaWAN (IN865)
Bluetooth Low Energy
4G / 5G cellular
03ProcessIntelligence in the cloud
SnapFacilityPlatformLIVE
Live asset register
Rules & alert engine
AI & predictive models
Audit trail & security
04ActOutcomes for teams
Mobile work orders
Live dashboards
WhatsApp & email alerts
NABH-ready reports
Encrypted end to endOpen protocols: BACnet, Modbus, MQTTEdge rules keep working offlineRole-based access & full audit trail

Hover any item to trace its data path

Use Cases

Smart Facility in Hospital Use

Select a use case to see the problem, the solution, the KPIs you can track and the SnapFacility modules involved.

A 24×7 Hospital Facility Command Centre

One team sees every alarm, asset and job across the hospital — and responds faster.

Common challenges

  • Alarms spread across separate screens and systems
  • Calls and WhatsApp to coordinate teams
  • No single picture for leadership

How SnapFacility helps

  • Unified alarms and live floor maps
  • Dispatch with SLA timers
  • Leadership dashboards in real time
Alarm response timeOpen critical jobsUptime

Energy, Water and Carbon Management

Sub-metering and smart controls show where resources go and cut waste.

Common challenges

  • One utility bill with no breakdown
  • Equipment running in empty areas
  • Sustainability reporting by estimate

How SnapFacility helps

  • Consumption by floor and system
  • Automated schedules and setbacks
  • Energy and carbon reports per bed
kWh per bedWater per bedCO₂ per bed

Fire Safety and NABH FMS Readiness

Fire, electrical and medical gas safety checks and alarms are tracked with evidence.

Common challenges

  • Safety inspections recorded on paper
  • Drill records hard to find
  • Gaps found during assessments

How SnapFacility helps

  • Scheduled safety inspections with photos
  • Alarm and drill history in one place
  • FMS evidence ready for assessors
Inspections on timeOpen safety issuesDrill compliance

Comfort and Experience Across the Hospital

Temperature, air quality, cleanliness and lift availability are monitored where patients feel them.

Common challenges

  • Comfort complaints handled reactively
  • Lift downtime frustrates patients
  • Cleanliness varies by shift

How SnapFacility helps

  • Comfort alerts before complaints
  • Lift faults dispatched instantly
  • Cleaning matched to footfall
Comfort complaintsLift uptimeCleaning compliance
Benefits

Why Hospitals Choose SnapFacility Smart Facility

Measurable gains in safety, uptime, cost and compliance.

One view of everything

Every system on one screen.

Faster response

Alarms dispatched with SLAs.

Lower running costs

Energy and water waste cut.

Safer hospital

Safety checks and alarms tracked.

Fewer surprises

AI predicts failures early.

Greener operations

Measured sustainability progress.

1Command centre
24×7Live view
AllSystems connected
Deployment

From Survey to Go-Live in Five Steps

Delivered within our standard 8-week implementation plan.

  1. 01Weeks 1–2

    Assess

    Systems, BMS, fire panels and networks reviewed.

  2. 02Weeks 2–3

    Design

    Smart facility roadmap and priority use cases agreed.

  3. 03Weeks 3–5

    Connect

    Sensors, controllers and integrations installed.

  4. 04Weeks 5–7

    Command centre

    Floor maps, alarms and dashboards configured.

  5. 05Weeks 7–8

    Optimise

    Monthly reviews of energy, uptime and comfort.

Dedicated implementation managerWeekly progress reviewsRole-based training includedLive within 8 weeks
Before & After

What Changes With Smart Facility

Without SnapFacility
With SnapFacility
Separate systems, separate screens
One live command centre
Alarms coordinated by phone
Dispatch with SLA timers
Utility bills with no breakdown
Energy and water by floor and system
Safety evidence in folders
Digital FMS evidence on demand
FAQ

Smart Facility Questions Answered

What is a smart hospital facility?

A smart hospital facility connects building systems — HVAC, power, water, lifts, fire safety — with assets, people and workflows in one platform, so the building can be monitored, managed and improved in real time.

Do we need to replace our BMS to become a smart facility?

No. SnapFacility integrates with existing BMS, fire panels and meters using open protocols, and adds sensors and controllers only where gaps exist.

What is a facility command centre?

It is a central view — on a video wall or desktops — of alarms, floor maps, equipment status, open work and KPIs, used by FM and engineering teams to coordinate response.

Can SnapFacility help with sustainability and green building goals?

Yes. Sub-metering, smart schedules and analytics reduce energy and water use, and reports show consumption and carbon per bed to support sustainability targets.

How does a smart facility support NABH?

Safety inspections, alarm histories, drills, equipment maintenance and environment records are captured digitally, giving assessors complete Facility Management and Safety evidence.

How do we get started?

Most hospitals start with an assessment and one or two priority use cases, such as energy or plant monitoring, then expand within the standard 8-week implementation approach.

See SnapFacility Smart Facility in Action

Book a personalised demo to see how Smart Facility connect to your hospital’s assets, teams and compliance workflows.