Continuous monitoring
Readings every few minutes, day and night — no manual rounds needed.

Wireless sensors monitor fridges, OTs, chillers, generators and utilities around the clock. When a reading drifts, SnapFacility alerts the right person and opens a work order — before patients are affected.
Press play — or just watch — to see how IoT Devices work with SnapFacility, step by step.
How it works · 5 steps
Wireless sensors on fridges, OTs, chillers and panels measure temperature, humidity, vibration, energy and leaks every few minutes.
Readings travel over LoRaWAN, Wi-Fi or cellular to a gateway and on to SnapFacility, encrypted end to end.
Thresholds, trends and AI models flag readings that drift out of range — or patterns that predict a failure.
Alerts go by app, WhatsApp, SMS or email, and escalate automatically if nobody acknowledges them.
A work order is created with the sensor history attached; the fix is logged and the temperature record is kept for audits.
Hospital IoT devices are small, battery-powered sensors fitted to equipment, rooms and utilities. They measure conditions such as temperature, humidity, vibration, energy use, water leaks and air quality, and send the readings to SnapFacility in real time.
Instead of staff writing readings in a register twice a day, every value is captured automatically, time-stamped and checked against limits. Problems are caught early, and you always have a complete, tamper-evident record for NABH, JCI and cold chain audits.
Readings every few minutes, day and night — no manual rounds needed.
Out-of-range values trigger alerts and escalations in seconds.
Vibration and energy trends reveal failing motors and compressors early.
Complete, time-stamped logs for cold chain, OT and NABH audits.
Every device is selected, installed and connected by SnapFacility and its certified partners.
For vaccine and drug fridges, blood bank refrigerators, pharmacy stores, OTs and ICUs. Probe versions read inside freezers and cold rooms.
Magnetic-mount sensors on chillers, AHUs, pumps, compressors and DG sets detect imbalance, bearing wear and misalignment.
DIN-rail and clamp-on meters track energy use per panel, floor or critical machine, and flag abnormal consumption.
Floor sensors under RO plants, CSSD, AHU drain pans and server rooms alert staff the moment water appears.
Measure CO₂, PM2.5, VOCs and differential pressure to support infection control and comfortable, safe indoor air.
Contact and motion sensors show when cold rooms are left open, rooms are in use, or restricted areas are accessed.
From the device on the wall to the action on your team’s phone — secure, real time and fully traceable.
Hover any item to trace its data path
Select a use case to see the problem, the solution, the KPIs you can track and the SnapFacility modules involved.
Fridges, freezers and cold rooms are monitored continuously, with alerts on excursions and a complete temperature history for every unit.
Temperature, humidity and pressure differential in OTs and ICUs are tracked against infection-control limits.
Vibration, temperature and energy sensors on rotating equipment reveal wear long before a breakdown.
Smart meters and leak sensors show where energy and water go, and catch waste immediately.
Measurable gains in safety, uptime, cost and compliance.
Condition data catches failing equipment early.
Cold chain alerts prevent loss of vaccines, drugs and blood.
Automatic, time-stamped logs replace paper registers.
Waste becomes visible and fixable.
No more manual reading rounds.
Escalations make sure nothing is missed.
Delivered within our standard 8-week implementation plan.
We map equipment, rooms, coverage and connectivity.
Sensor types, limits and alert rules agreed with your teams.
Wireless sensors and gateways fitted with minimal disruption.
Sensors linked to assets, locations and work-order rules.
Alerts, dashboards and reports switched on and handed over.
Every device type feeds the same platform, so you can start anywhere and expand.
SnapFacility supplies and installs temperature and humidity sensors, vibration and condition sensors, smart energy meters, water leak sensors, air quality and pressure sensors, and door and occupancy sensors, all connected to the SnapFacility platform.
Sensors send data over LoRaWAN, Wi-Fi, Bluetooth or cellular to a gateway, which forwards encrypted readings to SnapFacility. Existing BMS or meters can also be integrated using Modbus, BACnet or MQTT.
Yes. Temperature sensors with probes monitor fridges, freezers and cold rooms continuously, send alerts on excursions and keep a full temperature history for audits.
Most wireless sensors run for several years on a battery, depending on reporting frequency. SnapFacility monitors battery levels and raises a maintenance task before a sensor goes offline.
Yes. Automatic, time-stamped records of cold chain, OT environment and equipment conditions provide the evidence NABH and JCI assessors ask for, without manual registers.
Yes. When a reading crosses a limit or a trend predicts failure, SnapFacility can open a work order, assign it and attach the sensor history.
Book a personalised demo to see how IoT Devices connect to your hospital’s assets, teams and compliance workflows.